Section 1.1 Introduction.

Section 1.2 Basics of Stability Behavior : The Spring-Bar System.

Section 1.3 Fundamentals of Post-Buckling Behavior.

Section 1.4 Snap-Through Buckling.

Section 1.5 Multi-Degree-of-Freedom Systems.

Section 1.6 Summary.

Problems.

Chapter 2: Elastic Buckling of Planar Columns.

Section 2.1 Introduction.

Section 2.2 Large-Deflection Solution of an Elastic Column.

Section 2.3 Differential Equation of Planar Flexure.

Section 2.4 The Basic Case: Pin-Ended Column.

Section 2.5 The Five Fundamental Cases.

Section 2.6 The Effect of Imperfections.

Section 2.7 Stability of A Rigid Frame.

Section 2.8 End-Restrained Columns.

Section 2.9 Restrained Column Examples.

Section 2.10 Continuously Restrained Columns.

Section 2.11 Summary.

Problems.

Appendix.

Chapter 3: Inelastic Column Buckling.

Section 3.1 The Tangent and Reduced Modulus Concepts.

Section 3.2 Shanley's Contribution.

Section 3.3 Example Illustrating the Tangent Modulus and the Reduced Modulus Concepts.

Section 3.4 Buckling Strength ff Steel Columns.

Section 3.5 Illustration Of The Effect of Residual Stresses on the Buckling Strength of Steel Columns.

Section 3.6 The Effect of Initial Out-of-Straightness and Load Eccentricity.

Section 3.7 Design Formulas For Metal Columns.

Section 3.8 Summary.

Problems.

Chapter 4: Beam-Columns.

Section 4.1 Introduction.

Section 4.2 General Discussion Of The Behavior Of Beam-Columns.

Section 4.3 The Elastic In-Plane Behavior Of Beam-Columns.

Section 4.4 Elastic Limit Interaction Relationships.

Section 4.5 Example Problems Of Beam-Column Strength.

Section 4.6 Systematic Methods Of Analysis: Flexibility Method.

Section 4.7 Systematic Methods Of Analysis: The Stiffness Method.

Section 4.8 Inelastic Strength Of Beam-Columns.

Section 4.9 Design Of Beam-Columns.

Problems.

Chapter 5: Frame-Stability.

Section 5.1 Introduction.

Section 5.2 Two-Bay Frame Examples.

Section 5.3 Summary.

Problems.

Chapter 6: Lateral-Torsional Buckling.

Section 6.1 Introduction.

Section 6.2 Basic Case: Beams Subjected To Uniform Moment.

Section 6.3 The Effect Of Boundary Conditions.

Section 6.4 The Effect Of Loading Conditions.

Section 6.5 Lateral-Torsional Buckling Of Singly-Symmetric Cross Sections.

Section 6.6 Beam-Columns And Columns.

Section 6.7 Inelastic Lateral-Torsional Buckling.

Section 6.8 Summary.

Problems.

Chapter 7: Bracing.

Section 7.1 Introduction.

Section 7.2 Discrete bracing.

Section 7.3 Relative Bracing.

Section 7.4 Lean-on Bracing.

Section 7.5 Effects of Imperfections.

Section 7.6 Column Bracing Provisions.

Section 7.7 Beam Bracing.

Section 7.8 AISC Design Provisions for Beam Bracing.

Section 7.9 Summary.

Suggested Reading.

Problems.

Chapter 8: Specification - Based Applications of Stability in Steel Design.

Section 8.1 Introduction.

Section 8.2 Development of the beam-column interaction equations.

Section 8.3 Assessment of Column Strength.

Section 8.4 Assessment of beam strength.

Section 8.5 Specification Based Approaches for Stability Assessment.

Section 8.6 Effective Length Factors, aka "K-factors".

Section 8.7 Design Assessment Example.

Section 8.8 Frame Design Requirements in Canada and Europe.

Section 8.9 Summary.

Problems.